Logo letter

Grout Sealers application - All You Need to Know

21
When a new tile is installed either in the house or in the bathroom, there is a lot of anticipation from the homeowner. However, this doesn't mean that the work is done as you will still be needed to ensure that it is fixed well. Protecting your tile is the vital part when setting them. This ensures that they are used without any worries for a good period of time. Grout sealers do the remaining work to ensure perfection. They protect the porous surface of the grout and this is from absorbing water and chemicals that can be corrosive or destructive. The grout sealers come in two types. These are the penetrating grout sealers and the membrane forming grout sealers. Penetrating grout sealers form a protective barrier while the membrane grout sealer gets absorbed into the grout and fills the spaces with deposits of silicone or latex.

The application of the grout colorant and sealers is another process that requires individuals to take keen consideration. This is especially if you intend to give special attention to your kitchen, bathroom, and the floors. Before anything else is done ensure that you have bought the best and correct type of grout sealers for your home. For example, polymer modified grouts do well with the membrane forming sealers while cement grouts require a penetrating product.

Another important thing to keep in mind is checking all the joints for cracks as well as grout lines. Also, check for peelings on the tiles and other damages that may need to be repaired quickly. Before any application, make sure that you fill all the cracks seen. The sealant should be applied after a thorough cleaning has been done on the surface and let to dry. The working area should also be well ventilated. This is to avoid inhalation of strong fumes that are emitted by the chemicals. Another thing is to keep your working tools at your disposal so as to save time and avoid unnecessary inconveniences such as going away from the workstation. Also, wear protective clothing before the work. Click here for more tips on how to get the right color fast caulk.


The final stage of grout sealer application involves the spraying the installed tiles until the grout is covered. This is then followed by wiping the extra spray away. You allow drying to happen for a couple or so hours before testing the seal. You should allow it to completely dry before opting to or subjecting the area to regular and normal use.
  
For more tips on grout repair, visit https://www.youtube.com/watch?v=_PZeyEw5q_E.